Kerasiv K Fast
High-performance, rapid-setting professional tile adhesive.
High-performance professional adhesive with rapid setting and hardening, based on cement and special hydraulic binders, very low in volatile organic compounds (VOC) and fully recyclable at end of life, for laying terracotta, ceramic (single-fired and double-fired), clinker, porcelain stoneware, natural stone or mosaic tiles on floors and walls, indoors and outdoors.
It is particularly suitable for repairing floors with small or large tiles that must be walkable 2 hours after laying and back in service within 4 hours, or for laying tiles or natural stone where local unevenness or irregularities in the substrate require an adhesive bed thicker than 10 mm.
It is available in a white version (based on white cement) and a gray version (based on gray cement).
Kerasiv K Fast is used as an adhesive for laying terracotta, clinker or ceramic tiles (single-fired, double-fired), porcelain stoneware and natural stone, in small or large formats, on walls or floors, indoors and outdoors, for floor repairs in residential or commercial buildings where tiled surfaces must be walkable quickly.
It is also suitable for any repair where local irregularities in the substrate call for a thick adhesive bed (> 10 mm).
Kerasiv K Fast is compatible with the following substrates: thick or thin cement screeds with or without radiant heating, one- or two-component cementitious membranes such as RALLK ElastoKappa, ceramic floors suitably prepared with RALLK Primer K or Primer K Plus, plasterboard, fiber cement panels, cement, lime-cement, hydraulic lime and natural hydraulic lime plasters, and gypsum plasters after applying RALLK Primer K.
RALLK Kerasiv K Fast declaration of performance
Safety data sheetsRALLK Kerasiv K Fast safety data sheet
Technical data sheetsRALLK Kerasiv K Fast technical data sheet
CE marks FlyersNo documents of this type are available for this product.
