KuraRapido
Rapid-setting, non-shrink cement mortar for repairs, filling and anchoring.
Rapid cement-based mortar, fiber-reinforced and polymer-modified, with SCT (Shrinkage Control Technology), high workability, thixotropy, plasticity and elasticity, very low in volatile organic compounds (VOC) and fully recyclable at end of life. It is ideal for surface repairs and non-structural rebuilding of concrete, including concrete damaged by corrosion, and also for quickly rebuilding cornices, string courses and other decorative facade elements, even in thick layers.
Key features:
- for indoors and outdoors;
- for horizontal or vertical use;
- can be used both as a skim coat (3 mm thick) and for thick rebuilding (up to 5 cm per coat);
- can be painted within 60 minutes of application;
- does not shrink and prevents hairline cracks where it meets the existing plaster or masonry;
- resistant to freeze-thaw cycles.
KuraRapido has very low plastic shrinkage, bonds excellently to the substrate even when smooth and poorly absorbent, and offers excellent abrasion resistance and high durability against the weather. It slows the diffusion of vapor and carbon dioxide to protect the steel reinforcement in the concrete, has a low content of water-soluble salts and a very low content of volatile organic compounds (VOC), contains no solvents or substances harmful to health and is fully recyclable at end of life.
The main uses and applications are summarized below:
- quick repair of damaged concrete;
- rebuilding the edges of balconies, columns and beams;
- quick fixing of junction boxes or electrical mounting boxes;
- quick filling of chases in masonry, ready for finishing and painting within 60 minutes;
- rebuilding cornices, string courses, moldings, balcony edges or other decorative elements in stone or concrete;
- adding to hydraulic binder plasters or skim coats (lime, lime-cement, hydraulic lime, natural hydraulic lime) to speed up setting and hardening, offset the slower hardening caused by low temperatures, allow thicker layers and shorten the waiting time between coats;
- filling surface defects (honeycombing) in cast concrete.
KuraRapido can be painted with silicate, siloxane or acrylic paints, or finished with white or through-colored mineral finishes in powder or paste form.
RALLK KuraRapido declaration of performance
RALLK KuraRapido declaration of performance
RALLK KuraRapido safety data sheet
Technical data sheetsRALLK KuraRapido technical data sheet
CE marks
RALLK KuraRapido ce mark
RALLK KuraRapido ce mark
No documents of this type are available for this product.
No solutions related to this product.
No media available for this product.
