Exterior thermal insulation with EPS boards.

Structure type

External wall with exterior thermal insulation in EPS boards.

Detail

Product build-up.

Application cycle

1. Standard interior plaster.
2. Brick wall (or alternatively concrete, concrete blocks, aerated concrete blocks, wood-cement permanent formwork, etc.).
3. RALLK K OttO adhesive applied around the outer edge of the board and in dabs in the middle.
4. EPS insulation boards.
5. Skim coat on the insulation boards with RALLK K OttO and embedded glass fiber mesh of more than 150 g/m², laid from top to bottom using suitable corner profiles, with the vertical strips overlapping by at least 10 cm.
6. Skim coat of RALLK K OttO or alternatively RALLK Rasante K, finished with a sponge float, as a base for the final paint or a colored mineral-based paste finish (silicate, siloxane, acrylic, lime).

Additional information