Marmo K
Extra-fine white finish with a marmorino effect.
Extra-fine white finish based on air lime, hydraulic binders, pure selected aggregates with a maximum grain size of 0.4 mm and celluloses, offering high workability, elasticity, bond strength and abrasion resistance, breathability, thermo-hygrometric regulation of indoor spaces and weather resistance.
Marmo K is very low in volatile organic compounds (VOC) and fully recyclable at end of life.
It is used to create smooth marmorino-effect finishes over suitable base plasters.
Marmo K is particularly suitable for finishing base plasters made with lime and/or hydraulic binders. It can be applied over gypsum base plasters after using a suitable sealing primer.
The substrate must be sound, cohesive and well bonded to the wall, and free of dust, salt efflorescence, soot, oils, mold or other organic material, and in general of anything that could impair the bond between the finish and the base plaster.
RALLK Marmo K declaration of performance
Safety data sheetsRALLK Marmo K safety data sheet
Technical data sheetsRALLK Marmo K technical data sheet
CE marks FlyersNo documents of this type are available for this product.
Solution #2 - Exterior plaster on masonry with concrete beams and columns.
Solution #3 - Plaster on masonry around chimney flues or drain pipes.
Solution #4 - Skim coat over plaster on masonry with chimney flues or drain pipes.
Solution #5 - Skim coating of drywall panels.
Solution #6 - Skim coating of fiber cement panels.
Solution #8 - Traditional plaster on aerated concrete blocks.
Solution #9 - Exterior plaster on porous clay block masonry.
Solution #10 - Traditional plaster on wood-cement formwork block masonry.
Solution #11 - Skim coating of wood wool panels.
Solution #21 - Skim coat over interior or exterior traditional plaster.
Solution #22 - Skim coat on concrete, indoors or outdoors.
Solution #23 - Skim coat over interior or exterior traditional plaster.
Solution #24 - Supplementary skim coat over existing thin plaster.
Solution #25 - Skim coat from 3 to 30 mm, or supplementary skim coat, on mixed substrates.
Solution #27 - Finish coat on traditional plaster.
Solution #28 - Finish coat on concrete surfaces, indoors or outdoors.
Solution #29 - Finish coat on rubble stone masonry.
Solution #30 - Plaster on rubble stone masonry.
Solution #31 - Structural strengthening with mortar jacketing on rubble stone masonry.
Solution #33 - Structural strengthening with mortar jacketing on solid brick masonry.
Solution #34 - Crack repair using the “cuci-scuci” technique (stitching by local brick replacement) on solid brick masonry.
Solution #35 - Strengthening of mortar joints in solid brick masonry.
Solution #38 - Skim coat over plaster on porous clay block masonry.
Solution #39 - Thin traditional plaster (less than 10 mm thick) over radiant wall heating.
Solution #40 - Skim coat over traditional plaster with radiant wall or ceiling heating.
Solution #43 - Skim coating of OSB panels.
No media available for this product.
